General purpose overhead crane
High-Tonnage Magnetic Lifting Solution for Ferrous Scrap, Billets & Steel Plates
1. Product Overview
The Weiyuan Heavy-Duty Electromagnetic Overhead Crane is built for high-throughput ferrous metal logistics. Equipped with heavy-duty round or rectangular lifting electromagnets mounted on a rotating spreader beam, this double-girder bridge crane allows rapid loading, unloading, and stacking of metal scrap, steel billets, structural pipes, and heavy steel plates without manual rigging.
2. Key Advantages & Technical Highlights
- High-Efficiency Magnetic Clamping: Multi-magnet configurations provide high magnetic permeability and strong deep-penetration attraction for bundled steel.
- Fail-Safe Power Retention System: Integrated DC battery backup unit maintains magnetic holding power for 15 to 30 minutes in case of unexpected grid power failure.
- Slewing Carrier Beam Option: 360-degree motorized rotating beam allows rapid longitudinal and transverse alignment of long steel bars and coils.
- Heavy-Duty Class Construction: Designed for continuous severe-duty cycles with reinforced structural girders and high thermal rating motor windings.
3. Technical Specifications
| Specification Parameter | Standard Value / Range |
|---|---|
| Rated Total Capacity | 5 Ton – 50 Ton (Including magnet deadweight) |
| Span Length | 10.5m – 31.5m |
| Lifting Height | 12m – 24m |
| Magnet Power-Off Holding Time | 15 – 30 Minutes (Battery Backup System) |
| Main Hoist Lifting Speed | 10 – 20 m/min (High-speed heavy duty drive) |
| Duty Rating / FEM | FEM 3m / 4m (ISO A6 / A7) |
| Operator Interface | Enclosed Air-Conditioned Cabin / Industrial Radio Remote |
4. Typical Application Scenarios
- Steel stockholding yards and heavy coil storage warehouses
- Scrap metal recycling centers and shredder feed bays
- Steel rolling mills, continuous billet casting lines, and slab yards
- Heavy steel plate processing, shearing, and laser cutting depots
FAQ
1. What’s the information should I provide when inquiry?
More details or drawings, better. A: Lift capacity B: Crane arm length C: lift height: hook travel distance D: What material to lift E: power source or other specials you give us will be more appreciated.
2. How many operating methods for my selection?
Standard operating methods: A: pendent controller with push buttons .B: remote control with push buttons. Choose any type as you like.
3. Can this type work in hazardous environment?
Sure! We can customize for you, acid proof or explosion proof, no problem for that.
4. What about warranty time ?
12 months.
5. How can we install the crane? Our senior engineer can be your side to do the installation guide service and training.
6. May I visit your factory?
Of course. We can pick you up at train station, high-speed rail station or airport, and book hotel for you.